XAR® 400 耐磨鋼板技術參數和介紹
Wear-resistant | Steel grade | Material No. | Material Specification | |
special structural |
|
| 材料技術參數 | |
TKSE-Short name | EN-Short name | |||
|
| |||
steel | 材料代碼 |
| ||
| 上海志琪 | 電話：021-67675298 | ||
| TKSE- 簡稱 | EN- 簡稱 |
|
|
特殊耐磨結構鋼 |
|
|
|
|
|
|
|
| 703 |
Heavy plate | XAR® 400 | - | 1.8714 |
|
重型鋼板 | October 2012 | |||
|
|
|
|
|
XAR® 400 耐磨鋼板Scope 內容
This Material Specification applies to 3 to 100 mm (0.118 to 3.937 in.) thick plates of the wear-resistant special
®
structural steel XAR 400.
這個材料技術參數適用于厚度3--100毫米厚的熱軋耐磨結構鋼板 XAR 400.
ApplicationXAR® 400 耐磨鋼板用途
The steel may be used at the discretion of the purchaser for wear-exposed structures, e.g. excavating, mining and earth-moving machinery, truck dump bodies, conveying, crushing and pulverizing equipment, scrap presses, paving moulds and in switch manufacturing.
這種材料是采購商酌情根據產品構件的耐磨要求而決定選用，例如挖掘，礦山和土方搬用等設備，自卸卡
車車廂，輸送，破碎和粉碎設備， 廢鋼壓碎 和以及其它設備上。
The processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel. The processor/fabricator must assure himself, that his design and work methods are appropriate for the material, are state-of-the-art and are suitable for the envisaged purpose.
The selection of the material is left up to the purchaser.
是否能成功地使用用這種耐磨鋼板制造產品，工藝和使用技術是根本和關鍵。加工設備和制作人員必須保
證他們的設計和工作程序是適合這種材料的、是最先進的技術、最適合這種材料加工的方法。
材料選擇由采購商自己決定。
上海志琪實業有限公司，專業從事特種鋼板銷售及鋼板切割加工業務，致力于向客戶提供最優質的一站式服務。
http://m.feigekeji.com.cn/show_product.asp?s_id=22
